Yellow Zinc Phillips 1 1/4 20 Machine Rubber/screw Set

Description

Description

Yellow Zinc Phillips 1 1/4″ #20 Machine Rubber/Screw Set Crokinole Adaptor Kit (8 Screws + 12in Rubber)See video below for how this all works!  And HERE is a thread on BGG discussing the pros/cons of rubber vs. wooden pegs.  Ready to take your game to the next level?  We have Steel (sliver colored) and Brass (even higher end) rubber/screw sets available too if you prefer a different style!Instructions: Carefully cut 8 uniform ¾ inch lengths of tubing and push then onto the screws. Next, remove the wooden posts and screw in the metal posts with attached tubing about ¼ – ½ inch until tubing is flush with playing surface.  Screws are slightly larger than the holes to allow for a nice grip yet not damage the holes should wood peg reinstallation be desired.  Do not rest anything on the screws as undue stress can damage the existing holes.  For permanent wood peg installation simply use a small amount of wood glue.Note these are only certified to work with Mayday Crokinole boards, our 8 peg holes are a #20 size hole and these screws MAY be too large for other brands.

Additional information